Slideshow image
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr

How to extend the life of your borehole cleaning programme

Mike Deed, MD of water treatment specialists Geoquip Water Solutions, wants to set the record straight around the misunderstanding of Regulation 31 in the UK and its application to drinking water supply sources.

Millions of customers in the UK rely on water companies for their potable water and strict criteria are in place to govern both its quality and consumer safety.

Readers in the UK will be familiar with Regulation 31, laid down by the Drinking Water Inspectorate (DWI), which sets approvals on behalf of the Secretary of State for the Environment, Food and Rural Affairs. It covers chemicals and construction products used by water undertakers - from the source of the water up to the point of delivery to the consumer's building.

A lesser-known fact, however, is that since 2015, Regulation 31 is no longer required for products and substances intended for ‘disinfestation, disinfection or cleaning agents' used in waterworks apparatus and distribution systems.

In simple terms, this means if potable water supply boreholes become blocked with residue and biofilm caused by a build-up of bacteria, the problem can be tackled quickly through a combination of a mechanical cleaning programme and a water treatment chemical solution - without the need for Regulation 31 approval.
It is a topic that Mike Deed, MD of Geoquip Water Solutions, says is often misunderstood and he is keen to set the record straight, saying: "The DWI has made it clear that these type of cleaning products, which are intended for use when borehole equipment has been taken offline, are no longer covered by Regulation 31.
"It has handed responsibility to the water companies to take a risk-based approach in determining whether or not such a product presents an acceptable risk.

"We often find, however, that when we are asked to supply our BoreSaver range of water treatment solutions, the first question water companies ask us, is if we have Regulation 31 approval.

"It's important to reassure them that this is no longer necessary and make the point that a combination of a mechanical clean, followed by a treatment solution, is by far and away the best long-term answer in eliminating the bacteria that leads to a build-up of residue and biofilm - and therefore sludge - in a borehole."

Take control
Deed recommends "taking control" of a well by embracing a comprehensive maintenance regime which will help extend the time between cleans and improve future performance.

"A mechanical clean is good, but on its own, it can only do so much. If you don't airlift the bottom of the well, all the sand and slimy biofilm and residue remains there and becomes a breeding ground for bacteria, which is probably one of the most problematic issues within potable boreholes," he says.

"Evidence shows that chemically speaking, if you take control of a well, you are restricting regrowth of the bacteria, enabling you to maintain the cleaning cycle at the very least, and potentially increasing the time required between cleans."

Deed says although some companies will suggest using chemical sterilising agents, these rarely have any long-term impact on bacteria due to the protective biofilm produced during their propagation.

A more effective alternative is Geoquip's range of BoreSaver water treatment solution products that have been designed to tackle a range of bacteria, including iron-related bacteria, iron manganese and calcium carbonate. Completely biodegradable, the treatment contains a marker that gives an instant all clear to demonstrate that any remaining chemical residue has been removed.

Third-party accreditation
Despite having no need for Regulation 31 approval, Deed says he was determined to adopt a benchmark that would demonstrate BoreSaver's credibility and efficacy to potential customers. As a result, the range is approved by the US-based NSF - the first time such a standard has been achieved in the UK market and it is believed to be the only NSF-approved product in the European marketplace.

The NSF/ANSI/CAN 60 standard was developed by a team of scientists, industry experts and key industry stakeholders. 

"While we know that the NSF is not recognised as an accreditation in the UK, our view is that by having our products approved in such a rigorous way, we are providing fact-based third party evidence that our product is safe to use in potable water supplies, providing it is used correctly," adds Deed.

"Given the onus is now on water companies to undertake their own risk assessment for cleaning products, it helps them to see that BoreSaver meets the appropriate criteria to prove their water supplies will be clear of any chemicals before boreholes are put back online and into production."

Drilling Today Contact