Drilling Today Monthly Magazine on Water Well Drilling, Mining and Earth Moving Industry  

Go Back   Drilling Today Monthly Magazine on Water Well Drilling, Mining and Earth Moving Industry > Drilling Today General Forum > Water Well Drilling - Job Vacancy

Reply
 
Thread Tools Display Modes
  #1  
Old 05-14-2009, 07:42 PM
john john is offline
Junior Member
 
Join Date: May 2009
Posts: 13
Smile Oil india Ltd :Oil India Limited : job vacancies

A consortium of OIL INDIA LIMITED (OIL)and Indian Oil Corporation(IOCL) where OIL is the operator have been awarded on land exploration areas/blocks ,Area-86 in EPSAIV Bid Round1, 2004 & block 102/4 in EPSA IV Bid Round 2, 2005. Libya.
Both OIL and IOCL are independent “Schedule A” premier national Oil Companies of India,. OIL is engaged in the business of Exploration, Production and Transportation of Crude oil and natural gas and IOCL is engaged in the business of Exploration, Production, Refining and Marketing of Refined products.
OIL LIBYA Project is now looking for immediate appointment for its Libya Project the following positions. The Company has an ambitious exploration program of drilling for four exploratory wells in Sirte basin in 2009-10. Interested candidates are requested to send their CV for initial scrutiny and then a personnel interview in the following address by email.
Our email address is oillibya@gmail.com
A. Drilling Engineer:
This position is an office base position, but must visit well site/ support bases as and when necessary. The suitable candidate will be absorbed initially for a contract period of one year which may be extended further in due time depending on requirement.
Job Profile for Drilling Engineer:
· The candidate should preferably have Bachelor Degree in Petroleum engineering or Bachelor Degree in other engineering branches from recognized university with requisite experience as below
· Well operations engineer with 10+ of applied experience in oil and gas well drilling.
· Preparation of drilling tenders and bid evaluation of drilling tenders.
· Preparation of drilling engineering well plan using drilling software preferably Landmark’s stress check, Compass, Well plan, casing seat, GMI well check etc.
· AFE generation and review.
· NPT calculation, Days vs Depth curve, assessment and review.
· Experience in special down hole tool operation like, coring tool, Jars and its placement, BHA design, bit selection, fishing tools etc.
· Preparation of day to day well program and co-ordinate with third party contractors to ensure compliance of work.
· Review and work out well drilling program as per contractor’s and operator’s contractual requirement.
· Must have valid IWCF certificates(supervisor level)
· The candidate must be able to generate report using Landmark’s “open well” soft ware.
· Maintenance of daily cost sheets,Check /certify contractors’ invoices as per operator’s system.
B. Drilling Supervisor:
This position is a well site base position and function from well site on 28 days on and off system. The selected candidate will be absorbed initially for one year contract which may be extended later.
The candidate must have the following broad experience but not limited to :
· The candidate should preferably have Bachelor’s Degree in Petroleum Engineering or Bachelor Degree in any other branch of Engineering from recognized university with requisite experience as below
· Well operation engineer with 10+ years of applied experience in oil and gas well drilling.
· Knowledge of down hole problems and ability to identify same and implement mitigation plan in advance.
· Monitoring, supervising, preparing day to day well operation and implementing same as per prescribed well plan by company.
· Prepare forward planning with discussion with contractor tool pusher, third party contractors’ supervisors and arrange as per plan.
· Reporting daily well operation in Land mark’s “Open well “soft ware.
· Drilling optimization , by designing BHA, hydraulics, cost control by coordinating with drilling contractor tool pusher, third party contractor.
· Supervise, monitor the compliance of company as well as drilling contractor’s HSE policy and documentation of pre-spud safety meeting, and rig safety system .
· NPT calculation, Days vs depth curve ,assessment and review.
· Must have valid IWCF certificate.
· Experience in down hole tool operation like coring tool ,jars and its placement, BHA design, Bit selection, fishing tools etc.
· Basic drill site rig calculations.
· Water management, Spill management and reporting same to company
· Reporting of consumables of company items on daily basis.
C. HSE Engineer:
Job profile for HSE engineer: Must have the following minimum experience but not limited to :
· Should have a Bachelor Degree in Engineering with requisite experience as below:
· Must have 5-8 years of practical in hand experience in oil and gas well drilling.
· Must have experience in handling H2S gas while drilling and production.
· Supervise and ensure HSE requirement at drilling well site, water well site, and civil engineering work site of the company.
· To ensure company’s HSE program in these areas above.
· Must have valid HSE certificates related to oil and gas well drilling and production from reputed industry.
Please send your CV in the following address.
Oil India Limited
Hay Alandalus-Ali Shashtri Str.
P.O. Box 6242
Tripoli, G.S.P.L.J
e-mail - oillibya@gmail.com
Telefax: +218 21 4773629
V V Bhadrappa
Head-Project
Oil India Limited
Reply With Quote
Reply

Tags
job vacancies, oil india ltd

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +5.5. The time now is 02:14 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Drilling Today