_
 
Slideshow image
   
becpl
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
 
phe
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
 
phe
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr
 

Flomatic Break-Off Plugs Now Available in Wider Valve Size Range

Plugs Drain Riser Pipe, Make Submersible Pump Pulling Easier
drilling_today_Flomatic_Break
Flomatic has expanded its Break‐Off Plug selection for Model PLG (stainless steel) and Model PPLG (composite). Break‐Off Plugs are designed to drain the well water in the riser pipe, making it easier to pull the submersible pump for service.

The Break-Off Plugs are designed for domestic well water pump systems, municipal well water systems, and irrigation and sprinkler system applications. Available sizes include: ⅛, ⅜, ½ and ¾ inch, all in an NPT male connection. Flomatic Break‐Off Plugs are field replaceable after use and made of corrosive resistant materials.

When the water is drained from the break‐off plug, the piping system becomes much lighter and there will be less well water at the wellhead. This can reduce riser pipe weight from 25 to 50%, depending on pipe size. For example, using a Flomatic Model 80DI PLG can cut weight by 1,224 pounds, or nearly 40%. The company says this simplifies pulling well piping and submersible pump for service. In addition, approximately 150 fewer gallons per 100 foot of pipe will spill on the surface of the wellhead site.

Break-Off Plugs are offered on Flomatic submersible pump check valves series 80DI, 80DI‐VFD, 80DIX, 80S6 and 80S6VFD, in sizes from 2 to 12 inches.

Flomatic, based in in Glens Falls, N.Y., manufactures a ranges of valves for domestic and municipal water and wastewater applications. Flomatic is ISO 9001 and 14001 certified, with AIS-compliant products.

For more information, visit www.flomatic.com, email flomatic@flomatic.com, call 800-833-2040 or fax 800-314-3155.
 
 
Drilling Today Contact