Slideshow image
   
becpl
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
 
phe
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
 
phe
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr
 

Kalia Iron Ore Project, Guinea

Kalia Iron Ore Project, Guinea

It is owned and operated by Bellzone Mining.

The Kalia iron ore mine is a 50mt/y project under development in the Republic of Guinea, West Africa. It is owned and operated by Bellzone Mining. It will begin production in 2014 and will ramp up to full production by 2018.

The ore body contains an estimated 6.16 billion tonnes of inferred JORC magnetite resources. As of December 2012, Bellzone has identified the availability of 87.5mt of direct shipping ore (DSO) graded at 54.1% Fe at the mine.

The project, funded by the China International Fund, is estimated to cost $4.45bn and will include associated rail and port infrastructure.
 
Geology and mineralisation at Kalia I and II
Geology_and_mineralisation

The ore body contains an estimated 6.16 billion tonnes of inferred JORC magnetite resources.

The deposit is characterised by peaks of 1,060m. Mineralisation extends over a strike length of 40km and is divided between Kalia I and Kalia II, mapped at strike lengths of 19km and 20km, respectively. The Kalia I deposit is found within the axial region of the Lower Proterozoic greenstone belt.

The west-northwest trending belt includes rocks of the Kambui supergroup and is surrounded by gneiss granites of the early proterozoic period in the north and the biotite granite gneisses in the south.

Rocks enclosing the mineralised zone are composed of a wide range of schists. Amphibolites of varied composition are also widely concentrated. The southern margin of the deposit hosts bands of talc-rich assemblages with actinolite-talc and chlorite-talc schists that comprise magnetite dissemination and are ten to 50m thick.
 

"Bellzone has identified the availability of 87.5mt of direct shipping ore (DSO) graded at 54.1% Fe at the mine."

The mineralised zone is dominated by several close-banded iron, amphibole-magnetite schists and talc magnetite schists bearing ore bodies that have a west-northwest strike and a near vertical dip. A late archean-aged intrusive massif containing mesocratic granites and granodiorites is hosted in the west north-west section of the deposit. The south-east section is cut across by massive early proterozioc-aged intrusive body containing monzogranites.

The deposit also hosts narrow occurrences of sulphide mineralisation including pyrrhotite-chalcopyrite and bornite-chalcopyrite-pyrrhotite and pentlandite-chalcopyrite mineral assemblages. Almost on all types of rocks, surface weathering crust, a characteristic feature of the deposit is found. The crust contains three types of iron ore-bearing material: large haematite / goethite type iron oxide, canga type oxidised ores and detrital ore.

The Kalia II deposit, hosted within the Kambui Supergroup greenstone belt, is geologically similar to Kalia I with identical bounding geology. Structurally, however, the deposit is complex and includes extensive faults and folds. Large agnetite-haematite and magnetite quartzites-bearing bodies are found within the axial zone of the belt.

The belt is characterised by a vertical dip across its length. Inter-bedded schists, amphibolites and banded iron formations with thickness ranging between dozens of metres and 250m constitute the target zone of this deposit. The deposit features steep escarpments formed along ridge flanks with narrow ridge crests.
 
Iron ore mine development phases

The project is being executed in three-phases. Phase one, carried out between November 2005 and November 2007, completed the preliminary stages of ore body assessment. Magnetic survey, geological mapping and a surface assay conducted during this phase revealed the economic potential of the iron mineralisation.

Phase two, commissioned in November 2007, has completed to date, a 50-member exploration camp and associated services, collection and interpretation of technical data besides assessment of baseline environment impact. In addition, during this phase, a feasible infrastructure solution was developed, the first JORC resource was defined and an implementation plan was established.

Additional works during this phase included definition of the measured and inferred resources, metallurgical characterisation test-work, socio-economic, environmental and feasibility studies and securing government approvals and licences.

 

"Mining will begin in 2013. Higher grade resources will be targeted during the initial phase of mining."

Phase three will cover the construction, production ramp up and complete operational handover of the facility. The phase delivery will take place in two stages. During stage one 20Mt of direct shipping ore will be produced by 2014. By 2015, the concentrate production will reach 10Mt/y. Stage two will achieve 30Mt/y of DSO production by 2017. Concentrate production will reach 20Mt/y by 2018.

 
Production at Bellzone Mining's iron project

Mining will begin in 2013. Higher grade resources will be targeted during the initial phase of mining. Conventional open pit methods, including drilling, blasting and hauling, will be used.

To meet the production of 50Mt/y, two operating pit faces will be required. Approximately 2.5m of overburden will be pre-stripped to open the 20-50m oxidised zone that is characterised by a five to 20m thick surface layer.

Approximately 50Mt of overburden along with waste material will backfill the transport road and the construction pad development. It will additionally be used to level the access roads connecting the mining zone.

Extracted material will be transported to the primary crusher. Over-sized and wet ore will be sent to the ROM stockpile for pre-treatment before it is sent to the primary crusher. Primary and secondary crushing followed by screening will result in lumps and fines sized between -32mm +8mm and -8mm respectively. The lump and fine products will be loaded and hauled to the port.
Courtesy www.mining-technology.com

 
 
Drilling Today Contact