Slideshow image
   
becpl
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
 
phe
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
 
phe
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr
 
mincon

Modern Foundation Drilling

Modern_Foundation_Drilling

Established in 2009, the newest of the Mincon ventures is focused on providing complete Standard and Reverse Circulation drilling packages to today’s foundation drilling contractor.  This company is based in Veneta, Oregon, USA. Adding to the existing Mincon range of standard and RC hammers and bits the WVC Mincon range of products covers the following:

RC Hammers and Bits: 12”(305mm) to 42”(1067mm)
The GXM range of Bolt together RC hammers offer today’s professional contractors the ideal drilling solution for Hardrock conditions where ground erosion or disturbance are a major issue. Some of the unique features of the GXM range of RC hammers are:-

Simplicity

1. Very few parts makes tools easy to understand and handle
2. Bolt-Together design ensures easy assembly and disassembly
3. Simple highly efficient air porting design maximizes energy transfer
 

Performance

H.I.E. – High Impact Energy

(Due to the highly efficient air porting design and piston to bit weight ratio)

excellent energy transfer to the drill bit

(Due to the sturdy shank design and full length shank guide)

high discharge / flushing capability

(Accomplished with a big centre return hole and jetting device)

extremely high penetration rate

(Due to the unique design which maximizes energy transfer)

Durability

1. superior-quality steel with excellent heat treatment ensure maximum wear resistance
2. highly efficient air porting system ensures that all bearing surfaces remain well lubricated
3. excellent discharge / flushing capability ensures cuttings are quickly removed from the bit face
    providing an extremely clean hole and excellent life on the bit 
 

Multi Drills: 49” (1250mm) to 118” (3000mm)

multi_drills

The MXD range of Multi Drills offer many advantages to the contractor versus other cluster hammer systems available worldwide. The Multi Drill concept works on two basic principles;

(1) High Impact Energy while drilling hard rock
(2) High discharge / flushing capability while drilling hard rock

With a number of high energy RC hammers mounted in the Multi-Drill and the closed-loop RC system the Multi Drill optimizes both the operating and flushing air to maximize penetration and flushing.

The system operates very efficiently on both solid and uneven ground. Due to the unique air porting design when the drill bit in one hammer in the multi drill advances faster than the other bits the live operating air is sealed off to this hammer and diverted to the other hammers in the multi drill. This ensures a constant drilling pressure in the system and maximizes energy.

Because of the unique closed loop nature of the Multi Drill System the live operating air is never allowed to exhaust around the bit face. This unique feature eliminates the possibility of ground disturbance due to the destructive nature of live air.

Simplicity

1. Modular Concept: Systems are modular allowing the user the flexibility to change from one model
    Multi Drill to another using the same hammers and bits.
2. Very few parts makes tools easy to understand and handle
3. Bolt-Together design ensures easy assembly and disassembly
4. Simple highly efficient air porting design maximizes energy transfer

Performance

• H.I.E. – High Impact Energy
(Due to the highly efficient air porting design and piston to bit weight ratio)
• excellent energy transfer to the drill bit
(Due to the sturdy shank design and full length shank guide)
• high discharge / flushing capability
(Accomplished with a big centre return hole and jetting device)
• extremely high penetration rate
(Due to the unique design which maximizes energy transfer)

Durability

• superior-quality steel with excellent heat treatment ensure maximum wear resistance
• highly efficient air porting system ensures that all bearing surfaces remain well lubricated
• excellent discharge / flushing capability ensures cuttings are quickly removed from the bit face
   providing an extremely clean hole and excellent life on the bit
• Unique square-shaped drill bit allows the bit to be re-positioned when gauge wear becomes evident.
   This greatly extends the life of the bit
 

Concentric Under Reamers

concentric
The SXM range of Concentric Under Reamers offer the perfect solution for drilling and advancing casing simultaneously. The Under Reamer uses a Simple Push Operating System. The system consists of a center shaft, a guide body and a set of arms. When the center shaft is pushed forward into the drill position the arms are extended out beyond the casing into the ream position. The live air while drilling is directed perpendicular to the bit face to prevent excavating in loose formations. The unique system allows for modular components, where the Center Shaft can be replaced for different hammer shanks, and or the Guide Body replaced for Drive Shoe, or no Drive Shoe application.     

Hydraulic Rotators
Drill Pipe
Stabilizers: Fixed or bearing configuration
Jet Subs
Air Swivels
For further information please contact Tim Conn +1(541) 258-0084

 
Drilling Today Contact