Slideshow image
   
becpl
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
 
phe
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
 
phe
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr
 

Techniques of Diamond Core Drilling

The process of Diamond core drilling is of a low noise, free from dust and non-percussive drilling technique is used to make the smooth holes. The techniques of Diamond core drilling is needed when we require an exact circular penetration. Using this technique you can craft holes of any size and deepness.

Diamond core drilling method can be exercised for construction mechanism applications, water system applications, earthwork quality assessment application, electrical process applications, gas supply applications, heating applications, railway setting up application, bridge setting up application, plumbing application, telecommunication line fitting application, concrete section analysis, anchoring bolts, and for mining application. The main category of this technique is Rotary and Wire-line. Rotary technique is used for borehole as well as for coring in rocks. Wire-line is used for mineral exploration moreover it intends for not to make a hole but to salvage a core sample.

The different methods of this drill are Pneumatic, Electric, and Hydraulic available for wet or dry drilling purpose. The Electric process is utilized to drill exact holes in tile, concrete, granite, countertops, gravestones, plumbing and further masonry purpose. This process is also appropriate for drilling holes in ceilings, walls, floors, and each and every concrete anchoring system. This method can be used to execute the operation of drill quickly and efficiently.

The Hydraulic process tools up both mechanical and electronic shield means, and is the easy to go, cost-effective, long-lasting, secure and consistent method of drill. The Hydraulic process is brilliant option for forming larger diameter holes. Pneumatic process is fit for drilling holes in ceilings, walls, refractory bricks, floors, and concrete anchoring systems. This process makes use of a diamond core drill bit which is fixed to the end of drill rod in the drill machine or tools. The diamond bit is spin softly and at the same moment it is greased with water to avoid overheating. Concentrated drill speeds, low drill force and abundant use of water lubrication raise the robustness of the drill bit. This is sort out based on the diverse lubrication method used.

The diverse process of drilling are Pan Drilling, Hose or Water Drip, Spray Bottle, and Clay Dam drill. Pan process: This technique engages using pan or plastic tub filled by water so that it is covering the base of the material being drilled. Hose or Water Drip process: This technique of drilling employs a small tube to run the water in the bore hole and onto the surface of the hole. Spray Bottle process: This technique engages continuously spraying of water into the bore hole with the help of a spray bottle. Clay Dam process: This technique engages constructing a barrier around the drill hole by means of modeling clay.
This method allows water to flow into the diamond bit and provides good interior lubrication. In all the above process, it is very essential to utilize the pumping method in order to permit the lubrication to reach the tilt of the drill bit.

Tom Cruise is an eminent analyst and writer in mineral exploration related topics. He has authored many books on diamond drilling guide for Diamond Core Drilling Machine and Core Drilling Machine. Find more packages at Full force drilling

 

Drilling Today Contact