Slideshow image
   
becpl
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
 
phe
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
 
phe
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr
 

TECHNICAL SPECIFICATION GETECH Industries Ltd GE Tech PADR3-100 Auger Drill Rig

TECHNICAL SPECIFICATION	GETECH Industries Ltd GE Tech PADR3-100 Auger Drill Rig

General: PADR3-100 Model, Portable auger drill rig is capable of drilling in soft formation with hand held auger head up to a depth 3 meters. Under favorable drilling conditions. The following are the detailed specifications.

 
1 Model & Type
Capacity:
Diameter
Depth


:
:
PADR3-100, Portable auger dill Rig

100 mm (4 inch)
3 Meters (10 feet)
2

Power pack trolley

 

 

 

Power pack will be mounted on three wheel portable trolley. The front wheel can be tilt up to 180 degrees.

The trolley will accommodate Engine, Hydraulic pump and drive assembly, Hydraulic tank, Hydraulic oil cooler etc.

Manual towing arrangement will be provided.
3 Prime Mover


Engine make
Type
Model
Rated capacity



:
:
:
:
The system shall be powered by diesel driven engine with suitable PTO arrangement.

Greaves or Any other reputed make
GA-75
1510
10hp @ 3000 RPM or equivalent
4 Drill head  


Speed
Torque
Type



:

:
:
Hand held drill head will be provided. The drill head will be provided with removable cross handle. The drill head can be handled by two persons.
60 rpm
45 kg.m
Direct drive by hydraulic motor
The drill head control valve will be mounted on the handle for the operator ease.

A 6 meter long hydraulic hose will be given along with the unit.
5 Feed System

 

 

Manual feed. Two hooks/ Eye bolt will be provided for lifting purpose.
6 Hydraulics





Max operating pressure
Hydraulic Tank capacity
Filtration (Nom) – Return line





 
:
:
:
The entire Equipment is designed to operate at medium temperature encountered in the normal weather conditions.

Open loop circuit with fixed displacement pump and directional control and pressure relief valve for rotation.

140 Kg/Cm2
30 Liters.
25 Microns

Cooling: Fin type oil to Air.

OPTIONALS:  Three ton main hoist, SPT hammer attachment.
Note:

In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.

Ge Tech drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.

Drilling Today Contact