Slideshow image
   
becpl
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
 
phe
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
 
phe
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr
 

New long hole drilling rig Simba S7 D enters the South American market

New long hole drilling rig Simba S7 D enters the South American market
The Simba S7 D is now available for long hole drilling in the small to medium range drift size. Focus has been to develop a versatile, reliable and safe drill rig for mining conditions. The rig is built upon a modern design with many common components with the successful Boomer S1 D face drilling rig.

The Simba S7 D will be the direct replacement for the well proven Simba 1257.

Simba S7 D

This Simba model has an efficient hydraulic direct control system with manual functions. The use of hydraulic pilot signals made it possible to create an ergonomic and convenient operators environment with all functions within reach from the operators seat.

The Simba S7 D has the drilling unit mounted on a boom providing excellent reach and versatility. The Simba S7 D can be used in many applications such as long hole drilling, production drilling and when cable bolt holes are to be drilled. A carousel attached to the drilling unit makes the drilling process fully mechanized, efficient and most important of all, safe for the operator.
The demands on small, high performance, reliable and in the same time operator friendly drill rigs are high. With our Simba S7 D we managed to incorporate all these criteria", says Patrik Ericsson, Product Manager Long hole drilling equipment, Atlas Copco.

Compared to its predecessor the Simba S7 D provides several features such as:
Higher ground clearance
Tier 3/ Stage IIIA diesel engine
Faster tramming speed
Modern design
Communality in parts with the Boomer S1 D
Possibility to carry a water hose reel
An environmentally friendly Tier 3/ Stage IIIA diesel engine for tramming is built into a modern design chassis. The optional cabin of course meets the requirements from the authorities with FOPS approved roof and noise levels. And by the way, to make the operator happy we added air conditioner and HiFi sound system in the cabin, a happy operator means more drill meters!

Facts Simba S7 D

 

Drill bits

51-76(89)

Drill rods

Speedrod, R32 / TC 35 /T38 / (T45), length 4”, 5”, 6”.

Hole length

Mechanized drilling up to 20 m

Carousel RHS 10

10+1 rod

For more information, visit our website: www.atlascopco.com/simbas7d 

For further information please contact:
Patrik Ericsson, Product Manager Long hole drilling equipment
+46(0)19 670 7410, +46 (0)70 34 78 728 E-mail: patrik.ericsson@se.atlascopco.com
Sara Nydén, Communications Professional
+46(0)19 503 1251, +46 (0)73 27 54 714 E-mail: sara.nyden@se.atlascopco.com

The ROC D3-01 RRC

The rod handling system on the 01 model capably manages up to five 3.66 m rods. The 01 rig can be equipped with the R32, T38 and T45 drill steels. The Atlas Copco compressor on the 01 model has a free air delivery capacity of 95 l/s.

The ROC D3-03 RRC

The 03 model has a long folding boom with an optional rod rack for manual rod adding and an optional rod adding system to enable the addition of a single extension rod. The 03 rig can be equipped with the R32 and T38 drill steels. The Atlas Copco compressor on the 03 model has a free air delivery capacity of 80 l/s.
Both new ROC D3 RRC models are powered by a 116 kW Cummins engine and offer two rock drill options: the 12 kW COP 1240 and the 16 kW COP 1640.

"The new ROC D3 RCC rigs not only enhance drilling performance and productivity, but also create a safer working environment in harsher, less stable terrain – which  is where you most often rely on these rigs to perform,” says Hakan Aytekin, Product Manager at Atlas Copco.

For further information please contact

Surface Drilling Equipment is a division of the Construction and Mining Technique business area of the Atlas Copco Group, with its main manufacturing center at Örebro, Sweden. The division develops, manufactures and globally markets rock drilling equipment for various applications in civil engineering, quarrying and open pit mining. A strong focus on innovative product design and aftermarket support systems provides added customer value. More information can be found at http://www.atlascopco.com

Drilling Today Contact