Slideshow image
   
becpl
Mfg. of Water well Drilling Rigs, Dth Hammers and Button Bits...
 
phe
Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs...
 
phe
Blast hole Drills, Water Well Drilling Rig, Mud Pumps, Vertical Turbine Pumps...
klrsai deepagetechjcr
 

CatŪ 994F Wheel Loader Now Offers Extended High Lift Option For More Efficient Loading of 250-Ton Class Mining Trucks

caterpillar

Mining-Trucks

The new Extended High Lift Option for the Cat® 994F Wheel Loader enables the popular mining machine to load Cat 793 and similarly sized trucks more efficiently. The Extended High Lift (EHL) linkage provides 42 inches (1075 mm) more dump clearance compared to the High Lift linkage.

The additional lift height makes it easier for the operator to load a 250-ton size class truck. For faster cycle times, the operator can back the 994F away from the truck without racking back the bucket. The additional lift also enables the operator to dump the last pass without pushing material. Centering the load, for reduced truck wear, better truck handling and less spillage, is easier, too.

The EHL linkage is designed to reduce operator fatigue, decrease loading time and improve daily production when loading 793 size trucks. In a 793 loading test with the new linkage, cycle time decreased 5.5 percent, which resulted in a 5 percent increase in production. The 994F equipped with EHL linkage is rated at 35 tons (32 metric tons) and is a 7-pass match with the 793.

The EHL Option consists of new lift arms, lift and tilt cylinders, tilt links and counterweight material, which is added to the interior of the rear bumper. An extended high lift kit for retrofitting 994F wheel loaders already in the field will be available. New 994F wheel loaders also feature structural changes to both the front and rear frames for extended durability.

Productive and durable loader

The Cat 3516B HD EUI engine powers the 994F and delivers 1,577 gross horsepower (1176 kW) and net power of 1,463 horsepower (1092 kW). The proven engine delivers high torque rise for fast engine response and fuel efficiency while maintaining long engine life.

The 994F retains the Steering and Transmission Integrated Control (STIC) system that enables the operator to use small movements of a single hand to steer and to make direction and gear changes. STIC enables smooth operation with minimum effort.

Also to minimize operator effort while improving productivity, the Rimpull Control System enables the operator to set rimpull below 100 percent for optimum traction in poor underfoot conditions. The operator can reduce rimpull and ground speed by using the impeller clutch pedal, which is fully modulating for smooth control when digging and loading.

The 994F also features designs to reduce maintenance time and to make maintenance tasks easier and safer. The standard automatic lubrication system reduces maintenance time by automatically lubricating bearings requiring the most frequent attention. At the ground level service center, a maintenance technician can fill or drain fluid reservoirs and tanks.

For more information about the Extended High Lift Option for the 994F Wheel Loader, contact your local Cat dealer or go to: http://www.cat.com/equipment/wheel-loaders/large-wheel-loaders

994F Brief Specifications

 

Standard

High Lift

Extended High Lift

Engine model

Cat 3516 HD EUI

Cat 3516 HD EUI

Cat 3516 HD EUI

Gross power

1,577 hp (1174 kW)

1,577 hp (1174 kW)

1,577 hp (1174 kW)

Flywheel power

1,463 hp (1092 kW)

1,463 hp (1092 kW)

1,463 hp (1092 kW)

Operating weight

427,209 lb (193 779 kg)

433,239 lb (196 514 kg)

460,010 lb (208,660 kg)

Payload

38 tons (34.5 mt)

35 tons (32 mt)

35 tons (32 mt)

Std. bucket capacity

24.5 yd3 (19 m3)

22.5 yd3 (17 m3)

23.5 yd3 (18 m3)

Dump clearance

18 ft 10 in. (5.7 m)

19 ft 10 in. (6.0 m)

23 ft 4 in. (7.1 m)

Reach at full lift

7 ft 7 in. (2.3 m)

8 ft 11 in. (2.7 m)

8 ft 11 in. (2.7 m)

Static tipping load, full turn

245,113 lb (111 091 kg)

200,993 lb ( 91 094 kg)

176,380 lb (80 000 kg)

Breakout force

222, 336 lb (989 kN)

213, 442 lb (949 kN)

219,860 lb (980 kN)

 

Press Inquiries

Americas:
Sharon Holling                                               Amber Santor
Tel: 309-675-8995                                         Tel: 309-675-4693
Fax: 309-636-2738                                        Fax: 309-636-2738
Holling_Sharon_L@cat.com                        

Europe, Africa, Middle East:
Mia Karlsson
Tel: +41-22-849-4662
Fax: +41-22-849-9993
Karlsson_Mia@cat.com



Drilling Today Contact